Focusing on numismatics, and commenting upon current legal and world events, not to mention asides into the world of scuba diving, flying, and fine firearms.
My cousin Matt came in to visit this weekend and I took him to the range. He only has experience (quite extensive experience) with his duty pistol, with which he is quite good, so he was interested to try out a variety of pistols and I was happy to oblige.
Together we ran another 150 rounds through the P30, making it to 1450 with absolutely zero malfunctions of any kind to date. The feed ramp is now covered in black gunk but it keeps on going.
He rally enjoyed shooting my M&P 22 Compact with the Gemtech suppressor. Mirabile Dictu, Walmart had some .22LR CCI standard velocity in stock (3 round box maximum purchase). The M&P and Gemtech loved it and ran very very quietly with no issues and it was much more accurate than the Remington Thunderbolt and quieter as well.
He liked it quite a bit.
I also had quite a few other pistols for him to try: The Inglis Hi-Power, The S&W Model 29-2, The S&W M&P 9, The Glock 17, the Glock 21, the PA-63 and the 1911 and the Mauser HSC out to shoot.
Lots of ammo was turned into noise and many a steel target dropped only to be reset and dropped again.
Then back to the house for an epic cleaning of the guns (all save the P30) and then a good diner of Thanksgiving leftovers and a binge-watching of Game of Thrones.
The PA-63 has a terrible stock trigger pull, requiring fingers of steel to get a shot off in double action.
So I purchased a Wolff Gunsprings Hammer spring pack and decided to change the spring.
I went with the middle weight 11 lb spring.
Changing the hammer spring is simplicity itself:
1. Ensure the PA63 is unloaded and remove the magazine and remove the grips;
2. Tap out the pin on the bottom of the frame;
3. Take off the plug at the base of the frame now freed by the removed pin;
4. Take out the old spring, replace with the new spring making sure the hammer strut is inside the spring;
5. replace the plug and pin, and screw the grips back on.
The whole process takes maybe 5 minutes.
The improvement is immediate and remarkable.
The PA-63 is now practically PPK-like in trigger quality, I may go to the 9lb just to see if it becomes even better once I test it fully at the range.
If you own a PA-63, you really owe it to yourself to get a new hammer spring set and get it installed.
As for the Don'ts:
The Glock factory extended slide stop release for the 3 pin Glock frame does not work when installed in a two pin Glock frame.
It will cause the slide to lock open after every shot which is rather embarrassing.
The Eastern Block under Soviet domination manufactured a variety of pistols chambered in the Russian designed 9x18mm Makarov caliber.
I've already talked about my CZ-82, now for May Day its on to some other pistols chambered in this useful cartridge.
Both of the below pistols are blow-back action and both owe much to the Walther PP design.
The FEG PA-63
Made in Hungary by Fegyver és Gépgyár, Arms and Machine Factory more commonly known as "FEG".
With an aluminum frame strengthened with a bit of titanium in the alloy, the FEG is a nice, lightweight carry pistol. Walther PP in size and highly influenced by the Walther design, if not an almost complete copy, the FEG has a reputation for being more reliable than the Walther.
The action has a double action first shot with subsequent shots being single action, and with a seven round magazine the pistol is a very adequate pocket carry pistol. The magazine locks the action open on the last shot and just like the Walther PP, there is no external slide lock.
The FEG is an inexpensive firearm that can be found for $200 or less, making it an excellent choice for a CCWer on a budget.
The downside to the FEG is the trigger. The initial double action trigger pull is an excellent trigger finger exerciser that takes all your strength to operate. You don't need a Gripmaster when you have a PA63.
The FEG's single action is much better and hopefully the double action pull will loosen up a bit with time and further shooting.
At the range, the PA-63 fed all rounds perfectly, from the standard 9x18 ball to the Silver Bear hollow points.
Its a nice pistol at a great price.
The Bulgarian Makarov
This is a military surplus Makarov manufactured in Bulgaria and it was still encrusted with cosmoline when I purchased it.
Designed by Nikolay Fyodorovich Makarov, the Makarov pistol became the Soviet Union's standard military side arm from 1951-1991, replacting the 7.62x25 Tokarev. Satellite nations such as East Germany and Bulgaria and China also produced Makarov pistols.
This Bulgarian Makarov's trigger is very nice and smooth and far better in both double and single action than the FEG, indeed this trigger while not a match trigger by any means, is more than adequate for self-defense and plinking. Smooth in both double and single action, hits on targets were easy to achieve, even with the smallish sights.
An 8 round magazine and a price under $250 makes this yet another excellent carry choice when using hollow points. It fits tightly in a jeans front pocket or decently in a cargo pocket and multiple holsters are available for carry.
The Makarov design shines in the area of reliability and this one was no exception - ball, hollow points, it ate everything with no problems at all.
The PA63 and the Makarov are great pistols, both as carry and historical pistols and reminders of the Cold War. Both firearms are a testament to the excellent East Bloc small arms manufacturing industry while unable to provide consumer goods of quality to their subjects.
So Happy May Day and here's to the West winning the Cold War.
when you have a PA63.
